Description
- 𝗣𝗲𝗿𝗳𝗲𝗰𝘁 𝗦𝗶𝘇𝗶𝗻𝗴: This siding mounting block is specifically designed for 1/2” lap siding with a 4-inch overlap, ensuring a snug fit
- 𝗘𝗮𝘀𝘆 𝗜𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻: The vinyl siding light mounting block is simple and quick setup with clear instructions, saving time and effort
- 𝗣𝗿𝗲𝗺𝗶𝘂𝗺 𝗤𝘂𝗮𝗹𝗶𝘁𝘆: Your outdoor light mounting block is made from heavy-duty nylon for durability, with a textured, paintable surface
- 𝐕𝐞𝐫𝐬𝐚𝐭𝐢𝐥𝐞 𝐔𝐬𝐞: Siding mounting kit can mounts various fixtures on different siding types, for T-111, for HardiePlank Lap Siding
- 𝐂𝐨𝐦𝐩𝐞𝐭𝐢𝐭𝐢𝐯𝐞 𝐄𝐝𝐠𝐞: Mounting blocks for exterior lights are of superior quality with a textured, paintable white finish, ideal for 1/2 inch lap siding
- 𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐂𝐨𝐧𝐭𝐞𝐧𝐭𝐬: 2 Mounting Block with Electrical Box, 2 Cable Connectors, and 8 Screws for complete installation
- 𝐍𝐨𝐭𝐞: Caulk can be used for a custom fit around the top of the mounting kit if necessary
tool_nut –
We bought a house a few years back and we’ve been discovering more and more “funky” things the previous owner did to the house. Wiring was NOT his strongest quality.
The two outside lights at our front porch were hacked into place right up to the siding and he used gobs of silicone to seal them. Ugh!
We removed the lamps and bought new ones. However, I needed a cleaner mounting solution to be able to mount them flush and plumb.
These worked exactly as I had hoped and how they were advertised here. It made for a very clean job, traversing the ribs of the siding and allowing some depth for rewiring.
CRIU –
This is a great option to add or upgrade a light fixture on lap siding. It’s a solid, very clean-looking backing for a wall-mounted light fixture that avoids the gaps that normally show up on lap siding, allowing you to easily caulk and seal around. It has a built-in fixture box for your wiring, and can either replace a less well-suited exterior box or add a box where electrical wires aren’t enclosed (which is common, though not safe, with exterior wall fixtures).
The only negative is that the box is set up for 4″ lap siding, which is maybe typical vinyl siding, but I have 3.5″ aluminum lap, so there was a small gap under one of the laps. I filled this with caulk, and it’s not really visible – you can see in the picture its the lower lap with the gap.
All in all, a great product, a much better way to install wall-mounted light fixtures on lap siding than what I typically see, which often involves large gaps under the lap. A proper siding expert could probably install a drip edge around a fixture, but this is a cheaper solution for existing siding.
Tony. Tente –
This a perfect fix for installing lights with vinyl siding it fits perfectly and looks fantastic
CRIU –
I got new outside carriage lights for my garage and the base of the light was a larger rectangle than my existing equal sided, octagon shaped mounting blocks. I needed one that would ensure that the new light was solidly mounted, and waterproof. This mounting block did the trick. The great thing about this block is that you only have to have a small hole in your siding for the wire and it has a built in connection box. It comes with all you need to install your lights. Overall a good value.
Brett H. Tower –
Made instalation of new porch light and breeze. Looks awsome
Ms M –
I had a large light to install on our vinyl siding. This mounting block made the job much easier. The light ended up being square and vertical which would have been more difficult without the block.
The seller claims it is made of Nylon and I expect it will last at least as long as the light!
Would buy again.
Sheila –
As expected